Pfaff Medical Dog Carrier/Lifting Front Harness for Elderly or Injured Dogs (Large)

Technical Specification:

Power supply: Solar power and lithium battery(3.7V, 2000mAh)

Red LED : Indicates the unit is activated.

Blue LED: Indicate charging status.

Charging current: 250mA.(Charger selection:5V,500mA-1A).

Infrared sensor angle: 110 degrees

Detection range:50 feet depending on animals size (the bigger size, the larger range)

 

Caution:

1.It happens that human can hear part of its range. So put the device as far as possible from

human life place.Do not install the device in a children and baby playing ground area.

2.Do not cover up the PlR sensor or Solar panel.

3.To clean the device, use damp-soft and mild soap with water. Do not use harsh chemicals or

abrasive cleaning agents that may damage the device.

4.The length of the work depends on the frequency of the trigger. If the trigger is too frequent,

the battery will be low and the latter will not work.

5.We recommend charging time in 4- hours or you can wait until the charging indicator is off.

 

How to operate:

1.A strong ultrasonic wave to frighten animals. The wave's activated when an animal enters the PIR 

Sensor range and then animals feel uncomfortable and will run away from the area.

2.A strong flashing white-LED to scare animals.The strong flashing white-LED will be activated

when an animal enters the area, then animal will be scared and flee away.

3.Shooting and hawk calls are more effective for dog.

4.Charging indication function: When charging, the indicator light flashes slowly. When the 

charging is completed, the indicator light turns off.

 

Package included:

1 x Ultrasonic Bark Controller

1 x User Manual

1 x USB Cable